Pig
Cooling modules in stainless steel
Evaporative cooling consists of air passing through a condensed wet panel surface. The air, when passing through the panel, evaporates water. To pass from a liquid to gas, the water molecules need heat energy and this is captured directly from the passing air, so after going through the panel air begins to lose heat (its temperature decreases) and a vapour content increases (humidity increases).
The evaporative module cooling system is very durable, set with either 10 cm or 15 cm thick evaporative cooling pads, frames made of stainless or galvanised steel. Greater farm dimensions can be controlled and cooled, achieving a better relationship between efficiency and investment.
- Immediate temperature reduction inside the building.
- Energy saving.
- Low installation and maintenance cost.
- Maintains an adequate humidity level.
- Not harmful to the environment.
Technical characteristics
- 10 or 15 cm thick panel.
- Complete structure in stainless steel ( AISI 304 - 2B) or galvanised
- Stainless steel screw fixing.
- A plumbing kit with a 440 W steel pump included
- High panel performance.
- Air flow speed 1.5 m/s for 10 cm thick panel.
- Air flow speed 1.8 m/s for 15 cm thick panel.
- Low air pressure loss when passing through the panel
- Great versatility, adapted to the size of the installation.
- Each pump can supply up to 12 m of wet panel.
- Reduced electrical consumption.
Available models
- 10 cm module panel depth (2, 3, 4 and 5 panels width)
- 15 cm module panel depth (2, 3, 4 and 5 panels wide)
- Wet wall